Download free impulse responses

L96 – Medium Hall

Download the Zip file (21 Mb)

T600 – Natural Hall

Download the Zip file (24 Mb)

The impulse response files are stored in the same directory structure as the libraries. Check the PDF files for information on the presets and the directory structure.

The downloads contain the impulse response files in the following formats:

  • Wave, 32 bit, 44.1 Khz
  • Wave, 32 bit, 48 Khz
  • Wave, 24 bit, 44.1 Khz
  • Wave, 24 bit, 48 Khz
  • Wave, 32 bit, 44.1 Khz, quad channel
  • Wave, 32 bit, 48 Khz, quad channel
  • Altiverb, 24 bit, 44.1 Khz presets
  • Altiverb, 24 bit, 48 Khz presets

The quad files can be used with the Vienna Suite convo plugin, Waves IR1 and Steinberg REVerence.

Share this on:
  • StumbleUpon
  • Digg
  • Technorati
  • Facebook
  • Twitter
  • MySpace
  • E-mail this story to a friend!

{ 1 trackback }

Samples & Loops |
November 1, 2010 at 5:10 pm

{ 5 comments… read them below or add one }

Eike June 9, 2011 at 10:56 am

Is there some connection here to the acousticas IR’s ?

Emanuel June 9, 2011 at 11:00 am

No, absolutely not. Cheers!

Henry Lai January 28, 2011 at 7:27 am


I am a composer working mainly for movies, nearly all of my works are in surround so I am always looking for good surround reverbs. I came across your site and you have some nice impulses, do you have them in surround?


Emanuel February 2, 2011 at 9:04 pm

Hello Henry,

I am sorry, but I have no plans for surround libraries, for two reasons:

  • I do have a surround monitoring setup, but it is not calibrated and the monitors do not match; I only use it for watching DVDs… ;-)
    It takes a LOT more recording and post-pro effort to create surround IRs, I expect that the effort will never be profitable.


Steve Henshaw May 25, 2010 at 7:41 am

Great article!

I stumbled upon your site while looking for support for EastWest/Quantum Leap products, but your article on comparing the T600’s impulse responses to those of other, free IRs caught my attention.

I participate in a few DAW/recording forums and I would like to mention your product, offer the free samples you’ve made available, and ask others to make the same comparison you did…if you don’t mind. Many of the users actually enjoy these kinds of tests and comparisons, and I think Samplicity could find even more fans.

I’ve seen Samplicity mentioned a couple of times in the forums, but it never hurts to have your name “out there”!

Thanks for the article and the IR samples!