Samplicity’s Bricasti M7 Impulse Response Library v1.1
Samplicity has created a new Impulse Response Library, using the immensely popular and highly acclaimed Bricasti M7 reverb unit. And again, Samplicity has created a very complete, accurate and excellently sounding set of impulse responses, all in True Stereo and in Mono-to-Stereo. This library surpasses all previously released Bricasti IRs in terms of signal-to-noise ratios and detailed and rich reverb tails.
This library is completely FREE, to comply with the request from Bricasti that it is allowed to create impulse responses with the M7, as long as these IRs are not included in any commercial product.
Bricasti is a registered trademark of Bricasti Design Ltd., Medford MA, USA.
This first release – “Main, version 1.0/1.1″ – includes True Stereo and Mono-to-Stereo IRs of all current 134 M7 presets. The library is organized in the same way as the Samplicity L96 and T600 libraries (each also a 2 Gb downloadable product).
NewconomyWare – I am very happy to share this professional product with you – if it is useful for your work, please consider to make a donation, to support the elaborate and intensive work on this library and to help me with my costs. Your support is very much appreciated!
Version 1.1, why an update?
In the initial release 1.0 a silly channel swap was discovered, which gave the True Stereo presets an reversed stereo image. The first early reflections appeared in the opposite channel. This has now been fixed in version 1.1. Read more on this in the Version 1.1 ReadMe.txt file. So please upgrade by replacing the 1.0 version with the 1.1 version. All folders and filenames are identical.
Download instructions
Select and download the most appropriate format version for your convolution plugin. All Zip files contain the same presets, but differ with respect to bit depth, sampling rate and file format or filename. So, you do not need to download all files! Unpack the library folder from the Zip file and copy it to an appropriate location in your IR folders. Consult the documentation for your convolution plugin if you are not sure how your IRs should be organised. If required, make sure your plugin (like Altiverb) makes a scan of the added library folders.
Subscribe for update information
If you want me to keep you informed on updates and extensions (which are partly already finished!), please leave your email address below. Of course your email address will only be used for this purpose and not shared with others.
The Send button does not yet return you to this page, this will be fixed. Use the top menu to return to this page.
Important: Although these files are free, I explicitly request that you do not post these files on other websites. Please respect my work by linking to this page if you want to refer to this library. Thank you.
Wave files, 32 bit, 44.1 Khz
Samplicity Bri M7 Main - 01 - Wave, 32 bit, 44.1 Khz, v1.1.zip 376 Mb
The generic format for audio productions.
Wave files, 32 bit, 48 Khz
Samplicity Bri M7 Main - 02 - Wave, 32 bit, 48 Khz, v1.1.zip 409 Mb
The generic format for audio/video productions.
Wave quad channel files, 32 bit, 44.1 Khz
Samplicity Bri M7 Main - 03 - Wave Quad files, 32 bit, 44.1 Khz, v1.1.zip 248 Mb
Supported by Waves IR-1, Steinberg REVerence, Vienna Suite convolver.
Wave quad channel files, 32 bit, 48 Khz
Samplicity Bri M7 Main - 04 - Wave Quad files, 32 bit, 48 Khz, v1.1.zip 270 Mb
Supported by Waves IR-1, Steinberg REVerence, Vienna Suite convolver.
Wave files, 24 bit, 44.1 Khz
Samplicity Bri M7 Main - 05 - Wave, 24 bit, 44.1 Khz, v1.1.zip 203 Mb
For older and less common plugins. When in doubt, first try the 32 bit version.
Wave files, 24 bit, 48 Khz
Samplicity Bri M7 Main - 06 - Wave, 24 bit, 48 Khz, v1.1.zip 221 Mb
For older and less common plugins. When in doubt, first try the 32 bit version.
Altiverb (Wave) files, 24 bit, 44.1 Khz
Samplicity Bri M7 Main - 07 - Altiverb, 24 bit, 44.1 Khz, v1.1.zip 196 Mb
The wave files with correct filenames for Altiverb (version 5 and up).
Altiverb (Wave) files, 24 bit, 48 Khz
Samplicity Bri M7 Main - 08 - Altiverb, 24 bit, 48 Khz, v1.1.zip 213 Mb
The wave files with correct filenames for Altiverb (version 5 and up).
If you like these impulse responses and if you can use them for your work, please consider to make a donation to support my work and costs. Thanks!
Make sure to check out the demos of the other Samplicity IR libraries. Maybe they can be useful additions for your toolkit as well!
Please feel free to leave a comment or question below, but note that comments are moderated, so spamming is a waste of time 
{ 2 trackbacks }
{ 14 comments… read them below or add one }
Next Comments →
Peter thanks for the generosity
…hoping this can further help to improve these fantastics impulses, i want to report that flipping the phase on the reverb channel mixer (in a true stereo “arrangement” with reaper using Reverberate LE),obviously while listening the dry signal channel too, gives me a more “FAT” sound…just my ears ? suggestion? or maybe there really is a phase problem (like inverted pin on cables used for sampling?)
sorry for my poor english, i’m italian!
Hi Peter
Excellent work on the update. Downloading right now & will post again when used.
Can I just ask you if the AltiVerb files have a Quad version in them as well, for AltiVerb XL?
Hi Mark, thanks for your comment. I have no experience with SD but I know from the forums that it is a pain in the a$$ to get it working in True Stereo. For True Stereo you need to use the L and R files, which essentially gives you 4 channels with IR information (which is required for TS). In some plugins you can load them one after the other (for instance in Waves IR-1), some allow you to load them in Quad channel format (also included). A very very good and cheap plugin is LiquidSonics Reverberate, which also supports True Stereo. You should really check it out as alternative to SD! All the best! If you have more questions, you can also just email me. Peter.
Thank you very much for these! I use Space Designer Logic’s IR reverb plugin. Most of my productions are 24bit 44.1 I notice that your 24bit version has separate left and right files and one called M-to-S, which is a stereo wav file. Is this a stereo reverb IR that is suited to Space Designer or should I take the separate left and right files and combine them into an interlaced stereo file for Space Designer? Thanks.
Peter, Thanks for your generosity and your hard and meticulous work in bringing this IR set to us.
Thank you for sharing these! I’m excited to check them out. =)
Thanks for these ir’s, sounding great so far. -c
Hi !
Thx for share ! Sorry for my poor english.
Thanks for your hard work on these. I know they will sound excellent.
Awesome news !
Next Comments →